To Next PageTo Next Page
Need help?Do you have a question about the Sprague S-216-J Series and is the answer not in the manual?
General| Brand | Sprague |
|---|---|
| Model | S-216-J Series |
| Category | Water Pump |
| Language | English |
Pump's fluid inlet port should be level with or below the fluid reservoir.
Two mounting holes on underside of pump's fluid body for attachment to base plate.
All plumbing must be rated to 1-1/2 times maximum operating pressures.
Steps to start the pump operating, including air pressure adjustment.
Procedure to safely stop the pump operation and bleed hydraulic pressure.
General maintenance guidelines and recommended inspection periods.
Guide to checking the pump and outlining corrective actions for malfunctions.
Standard hand tools required for pump disassembly and reassembly.
Visually inspect parts for damage such as cracks, pitting, scoring, corrosion, or galling.
Check fluid piston and body for galling; polish or replace if necessary.
Perform tests at various air pressures, closing discharge valve to build max output.
