EasyManua.ls Logo

SprayMate SPRITZ - ATTENTION; Safe Chemical Handling and Storage; Chemical Compatibility and Protective Gear; WARNING

Default Icon
14 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ATTENTION
Please read the following information carefully. Failure to follow instructions or improper use could lead to
explosive failure causing serious injuries.
After using spray bottle with chemicals, it is important to spray with fresh water for 3-5 minutes to ensure residual chemicals in the gun, tank,
pump, and hose are cleaned out. This will extend the life of your spray bottle. Never leave chemicals or solutions sitting in your spray bottle
after using.
Always remove the batteries before storage. Do not store your spray bottle in extremely high temperatures. Heat can lead to the build-up of
pressure within the spray bottle, resulting in a possible explosion. If there is pressure in the pump, do not try to remove it with tools. Do not try
to make modications to the spray bottle. Always use SprayMate® branded replacement parts from the manufacturer.
Never spray ammable, caustic, acidic, chlorine, or other corrosive solutions or heat, pressure, or gas producing chemicals. Always read and
follow chemical manufacturer’s instructions before use with this spray bottle as some chemicals may be hazardous when used with this
spray bottle. Always wear the proper protective equipment when operating.
WARNING
This product contains chemicals, including lead, known to the state
of California to cause birth defects and other reproductive harm.
This product is designed to apply chemicals that may be
harmful and could cause serious personal injury if inhaled or
brought into contact with the user
Copyright © WESSOL, LLC
2

Related product manuals