35
&;8>,5/<288=371
In case of malfunctions or questions of any kind, please contact your service center or directly:
Spring International GmbH
Höhscheider Weg 29
D-42699 Solingen
Germany
www.spring.ch
Problem Possible cause
%85>=387
Induction cooktop does not turn
on.
1. No power input
2. Internal defect
1. Plug the power cord into a
suitable socket. Make sure the
socket has the proper voltage.
2. Contact your dealer or service
office.
The ON/OFF lamp blinks and the
cookware does not get warm.
1. The cookware is not suitable
for induction cooking or the
diameter is too small.
2. The cooking container is not
in the middle of the ceramic
surface.
1. Use appropriate cookware acc.
to Chapter 5.
2. Make sure the cookware is
centered on the rings on the
ceramic surface.
Heat suddenly goes off during the
cooking process.
1. The induction cooktop is inter-
nally overheated.
2. The temperature of the cookware
is too high because it was used
while empty.
1. Ensure good air circulation as
described in Chapter 4.1.
2. Carefully remove the cookware
from the ceramic surface and
allow the appliance to cool
down.
The heat is too low. 1. The cookware is not flat or the
material is unsuitable
1. Use suitable cookware as
described in Chapter 5.
The wireless remote control doesn´t
work.
1. The battery is empty.
2. Internal defect
1. Replace the battery.
2. Contact your dealer or service
office.
BA_Induktionskochstelle 58 9842 10 31_58 9840 25 31_GA 30.03.15 16:13 Seite 35
To Next Page
Loading...