What to do if my Springlane Mixer stops after mixing for a while?
If your Springlane Mixer stops after a longer period of mixing, it's likely that the overload protector is preventing motor damage. To resolve this, unplug the power cable and allow the mixer to cool down for about 30 minutes before reconnecting it.
General| Power | 1000 W |
|---|---|
| Capacity | 1.5 L |
| Functions | Blending, Ice Crushing, Smoothie |
| Speed settings | 5 |
| Blade material | Stainless Steel |
| Dimensions | 20 x 20 x 40 cm |
| Material | Stainless Steel |
Specifications of the device's power output and maximum rotational speed.
Details on the maximum filling volume and physical size of the blender.
Information on the blender's weight and key functionalities.
List of included accessories and explanation of warning symbols.
Covers intended use, age restrictions, supervision, and safe handling of parts.
Ensures safe operation through proper placement, connections, and avoiding hazards.
Details on the built-in overheat protection and its function.
Lists and identifies all individual parts of the high-performance blender.
Explains the critical warning symbol indicating potential device or bodily harm.
Ensuring the lid safety switch is correctly inserted for operation.
Correct sequence for lid removal and warning against improper opening.
How the timer display works and how to operate the speed controller.
Detailed procedure for using the auto-clean mode with water and detergent.
Overview and operation of automated programs: Pulse, Smoothie, Crushed Ice, and Grinding.
Details on stepless speed adjustment and the auto-clean function.
Steps for preparing ingredients, placing the device, and securing the container and lid.
Guidance on starting, controlling speed, using automatic programs, and adding ingredients.
Safely stopping the mixer, removing the container, and cleaning the unit.
Safety measures for mixing hot ingredients, steam escape, and boiling liquids.
How to use the plunger to assist ingredient processing towards the blades.
Step-by-step guide for cleaning the blender container and its parts.
Instructions for drying components and essential safety tips during cleaning.
Basic steps to diagnose issues before consulting specific solutions.
Solutions for when buttons are unresponsive or the device does not power on.
Addresses device stopping, mixture consistency, and ingredient adherence issues.
Solutions for mixtures being too fine/liquid or ice not being chopped correctly.
Contact details and warranty information for product support.
Guidelines for environmentally friendly disposal of the device.
States compliance with European Directives for EMC, Low Voltage, and RoHS.
To Next Page
