Need help?Do you have a question about the Springs Window Fashions AutoView and is the answer not in the manual?
General| Brand | Springs Window Fashions |
|---|---|
| Model | AutoView |
| Category | Window Blinds |
| Language | English |
Visual examples of installed shades in different mounting styles.
Introduction to the step-by-step installation process for cellular shades.
List of components, hardware, and essential tools for shade installation.
Guide to selecting the appropriate inside, ceiling, or outside mounting method.
Instructions for assembling and installing optional side mount brackets.
Steps for placing the shade in the desired location and marking corner positions.
Measuring from the shade edge to accurately mark bracket screw locations.
Instructions for drilling pilot holes and fastening the mounting brackets securely.
Guidance on assembling and attaching optional extension brackets.
Procedure for securing the shade's headrail into the already mounted brackets.
Important information regarding the use and function of cord cleats for shade operation.
Procedure for adjusting the operational length of the installed shade.
Steps for safely removing the installed shade from its mounting.
Instructions for installing optional hold-down brackets for added stability.
Introduction to motorized shades, their benefits, and technology.
How to operate the motorized shade using basic UP/DOWN buttons.
Explanation of remote control features and pre-programmed limits.
How to use the home button on single-channel remotes for favorite positions.
Understanding remote and shade LED lights for status and battery indication.
Location and function of program buttons on remotes and shades.
How to set a custom lower limit for the shade's closed position.
How to set a custom upper limit for the shade's open position.
Setting a preferred intermediate shade position using the home button.
Setting a common intermediate position for multiple shades in a group.
Steps to correct reversed shade motor operation if directions are inverted.
Procedure to pair a new remote when the original is lost or damaged.
Setting up a single-channel remote for group shade control.
Enabling individual control of shades within a group using secondary remotes.
Making a two-button remote the primary controller for a group of shades.
Enabling individual control with a two-button primary remote.
Steps to perform a complete network reset for all connected devices.
Resetting the motor to factory default settings.
Resetting remotes to clear paired devices and settings.
Explanation of Z-Wave wireless networking protocol for home control.
Regulatory statement regarding FCC Class B compliance for radio frequency emissions.
To Next Page
