Need help?Do you have a question about the SpringWell CSF+ and is the answer not in the manual?
The provided manual describes the CSF+ Whole House Filter/Salt Free Softener, a comprehensive water treatment system designed for residential use. This system combines a whole-house filter with a salt-free softener to provide clean, conditioned water throughout the home.
The CSF+ system operates in a multi-stage process to treat incoming water. Water from the source first enters a Pre-Filter which removes larger sediment and particulate matter, protecting the subsequent stages of the system. After pre-filtration, the water flows through two main tanks: the Carbon Filter Tank (CF+) and the Conditioner Tank (FS+).
The Carbon Filter Tank (CF+) is the second stage, where water passes through a carbon media. This stage is primarily responsible for removing chlorine and other chemicals, improving the taste and odor of the water. The carbon media also helps to reduce other contaminants that might be present in the water supply.
The final stage is the Conditioner Tank (FS+), which functions as a salt-free softener. Unlike traditional salt-based softeners that remove hardness minerals through ion exchange, this system uses a salt-free conditioning process. This process neutralizes the hardness minerals (like calcium and magnesium) without removing them from the water, preventing them from forming scale on pipes and appliances. This approach means no salt is added to the water and no wastewater is generated from regeneration cycles, making it an environmentally friendly option.
The system is designed to be installed on the main water supply line of a house, ensuring that all water used for drinking, bathing, and other household purposes is treated. A bypass valve assembly is incorporated into the system, allowing for easy isolation of the filter and softener tanks for maintenance or in case of an emergency, without interrupting the household's water supply.
The CSF+ system consists of two main tanks, the CF+ (Carbon Filter) and FS+ (Conditioner), along with a pre-filter housing.
Carbon Filter Tank (CF+) Specifications:
Conditioner Tank (FS+) Specifications:
The system requires a minimum water pressure of 25 PSI for optimal operation. It is crucial to note that the system must be installed on a main water supply line. For well water applications, it is recommended to contact customer service for specific guidance, as additional pre-treatment may be required.
The CSF+ system is designed for whole-house water treatment, providing conditioned and filtered water to all faucets and appliances.
Regular maintenance is essential to ensure the longevity and optimal performance of the CSF+ system.
The manual provides comprehensive, step-by-step instructions with accompanying images for installation, including assembling the bypass valve, prepping and installing the pre-filter, and installing the main tanks. It also highlights important safety warnings, such as ensuring all applicable plumbing codes are followed and that the system is installed on a main water supply line. For well water users, it strongly advises contacting customer service for specific guidance.
General| Brand | SpringWell |
|---|---|
| Model | CSF+ |
| Category | Water Dispenser |
| Language | English |
To Next Page