Questions? Call (800)-589-5592 3
Leaning Tank
Tank Boot
Level Tank
If the tank is not perfectly straight, carefully lift the tank straight up a few inches and tap it on the ground until
the tank stands vertically and fits snuggly into the tank boot.
PLEASE READ INSTRUCTIONS FULLY PRIOR TO ATTEMPTING INSTALLATION. Be sure to follow
all applicable plumbing codes. The system must be installed on a main water supply line
WS1
Tank Width 10”
Tank Height 54” (64” with Head)
Flow Rate 12 GPM Service
Connection Size 3/4”
Backwash Rate 5 GPM
Operating Pressure 25-80 PSI
Operating Temperatures 36 – 120 F
pH Range 6.5 - 10
WS4
Tank Width 13”
Tank Height 54” (64” with Head)
Flow Rate 18 GPM Service
Connection Size 3/4”
Backwash Rate 7 GPM
Operating Pressure 25-80 PSI
Operating
Temperatures
36 – 120 F
pH Range 6.8 – 10
System Specifications
Well Water Filter System
To Next Page
Loading...
