Sprint Electric PL/X Series

Need help?

Do you have a question about the Sprint Electric PL/X Series and is the answer not in the manual?

Summary

1 Introduction to DC Motor Drives

2 Anybus CompactCom Module Installation Guide

3 Configuring Fieldbus Communication

3.1 Fieldbus Configuration and Settings

Configures connections, jumpers, and data control for Fieldbus.

3.2 Configuration Conflict Resolution

Identifies and warns of programming conflicts in GOTO connections.

3.3 Fieldbus Diagnostics and Monitoring

Monitors fieldbus status, input/output data, and Anybus type.

4 Anybus Option Modules Overview

4.1 Overview of Available Interfaces

Lists available Anybus modules for different Fieldbus networks.

4.2 PROFINET Module Details

Details PROFINET Fieldbus interface, LEDs, cyclic/acyclic data.

4.3 Modbus TCP Module Details

Details Modbus TCP Fieldbus interface, LEDs, cyclic/acyclic data.

4.8 CANopen Module Details

Details CANopen Fieldbus interface, LEDs, cyclic/acyclic data.

5 Mapping Fieldbus Parameters

5.1 Using drive.web savvy for Parameter Mapping

Guides on using drive.web savvy to map PL/X parameters to host PC software.

6 Setting IP Address with HMS IPconfig

7 Parameter Lists

7.1 PL;X Parameter Reference

Detailed list of PL/X parameters with their Modbus, Profibus, EtherCAT, etc. mappings.

7.2 JL;X Parameter Reference

Detailed list of JL/X parameters with their Modbus, Profibus, EtherCAT, etc. mappings.