small amount of battery power. Therefore, please remove the batteries
if the camera is not in use for an extended time.
Menu Settings
Switch the camera to SETUP mode & press MENU. Press ▲▼◄► to
select the desired value, And then press OK to save.
Choose to take Photo / Video/Photo+Video
Choose the image size, e.g. 3MP, 5MP,
8MP, 10MP or 12MP.
Choose the number of images taken after
each trigger (1-10).
Choose the interval time length between the
images taken in burst mode (Short 1/2/3s).
Choose the video resolution.
Set the video length to the desired duration.
Enable or disable video sound recording.
Select between High,Normal,Low,and OFF.
The sleeping time after each trigger.
Camera can be triggered by timer at a
preset time interval. Please note that even
in Time Lapse mode, the camera still can
be triggered unless the Sensitivity set to off.