SPT Labtech Apricot S3 - Page 35

© 2021 SPT Labtech Ltd
35
User can enter Select Head/Plate from the “Check head and maximum volume”
prompt after Initializing or click the “Select Head/Plate” from the Setup tab. There are
2 sections: Select Head and Select Plate.
User can browse
all the heads and
select the desired
one.
Or choose the
channel
rst, then
select the desired
volume.
If there’s a
protocol created,
switching the head
within the same
channel will have
no e
ect to the
protocol lines.
Switching to a
di
rent channel
will automatically
empty the existing
protocol.