© 2021 SPT Labtech Ltd
If you are receiving errors shown to the
right, such as “You can’t rename the
plate”, this is due to your account type.
Access to Features by User Type
Admin
o Can create or edit their own plate under “My Plate”.
Can edit Super User’s plate without the need to copy their plate.
Super User
o Can create or edit their own plate under “My Plate”.
o Cannot rename or delete another Super User’s plate or Admin’s
plate
o
Cannot calibrate another Super User’s plate or Admin’s plate.
Although it can go through the steps for plate calibration, it
does not allow the Super User to save the changes at the end.
o Can copy another Super User’s plate or Admin’s plate. The
copied plate can be found under “My Plate Only” wh
ich can be
edit
from there.
User
o Does not have the access to “Select Head/Plate”.
For additional user information, see Section 5.1.2. Login Software with Three Level
Account.
To Next Page
Loading...