© 2021 SPT Labtech Ltd
Below shows the Serial Dilution menu for 8-Channel tip from 96 Well plate to 384
Well plate. This function is not allowed using a full head (384-channel, 96-channel or
24-channel) operation.
The columns from Start Column to End Column will perform Serial Dilution through
mixing. It can be performed from left to right or right to left through the settings for
Start Column and End Column. The color will be faded from dark to light represents
the moving direction in Preview Position.
The interval is for the columns that will be perform Serial Dilution between Start and
End Column. If using the default “1” interval, the software will run all the columns. If
change the value to “2”, the software will skip 1 column during the operation. If
change the value to “3”, the software will skip 2 columns during the operation. And so
on.
The display of Preview Position for single column channel is di erent than the full
head channel. When there includes a spread-out multi- aspirate or dispense, the
display color will be faded. The color transit from dark to light which represents the
operation sequence.
To Next Page
Loading...