SPT Labtech Apricot S3 - 1. Specifications

© 2021 SPT Labtech Ltd
7
The following is a list of the ideal operating parameters for the S3. This instrument
will perform optimally and safely under standard laboratory settings. The use of this
instrument in other environments is not recommended, and results may prove
unsatisfactory.
Model
S3
Dispensing Precision
(1250) <3% CV at 10µL *Note: 1250µL Aluminum Core
(1000) <3% CV at 10µL
(500) <3% CV at 5µL
(125) <3% CV at 1µL
Dispensing Accuracy
(1250) +/– 2% error at 10µL
(1000) +/– 2% error at 10µL
(500) +/– 2% error at 5µL
(125) +/– 2% error at 1µL
Resolution
(1250/1000/500) 1µL
(125) 0.1µL
Volume
Max channel capacity 1250µL
Dispense range
(1250) 5–1000µL
(1000) 5–1000µL
(500) 1–500µL
(125) 0.5–125µL
Particle Size
< 0.032” diameter to prevent p blockage
Current
3 Amp
Power (Input)
100 – 240VAC, 50 – 60Hz
Power Consumption (MAX)
130W
Power Consumption Idle
60W
Operating Temperature
40 –104°F, 5 – 40°C
Relative Humidity (MAX)
80% (non-condensing)
Equipment Ratings
Indoor use only, temperature regulated, non-dusty
Altitude
Up to 2000m
Pollution Degree
2
Power Supply Voltage
Flu ons not exceeding ± 10% of the nominal voltage
Transient Over Voltage
According to Category II (In on Category)
Dimensions
18” W x 16” D x 23” H
(457mm W x 406mm D x 584mm H)
Weight
Approx. 60lbs (27kg)