Ｃ、
Ｃ、Ｃ、
Ｃ、
Heineken Keg
Heineken kegs are pre-charged with CO2 and do not require the use of a regulator. Do
not install the CO2 cartridge. Leave the control knob in the off, “-”, position
Figure 21
1. The Heineken connectors that come with your beer cooler can work with all
Heineken 5 liter kegs. However you must use a flat head screwdriver to remove the
green base from the keg, if it is already installed, in order to install the new connector
provided with the beer cooler.
2. When installing our connector to the Heineken keg, you must first install the clear
beer connector tube to the connector and one end to the tap mechanism, snap the
beer connector to the Heineken keg adapter then place the adaptor onto the keg.
Figure 22 Figure 23
CO2 connector position
Heineken Adaptor
Heineken keg
To Next Page
Loading...