EasyManua.ls Logo

SPT EPC-13C - User Manual

SPT EPC-13C
11 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
6.5-Quart Electric Pressure Cooker
Model: EPC-13C
INSTRUCTIONS MANUAL
Thank you for purchasing our electric pressure cooker. Please read this instruction
manual carefully before use and keep it in a convenient place for future reference.
(Pictures in this booklet are for reference only. Please refer to the actual product.)

Questions and Answers

  • C
    christopherwrightJul 27, 2025
    Why is air escaping from the rim of the lid on my SPT Electric Pressure Cooker?
    • C
      craigsandersJul 27, 2025
      If air escapes from the rim of the lid on your SPT Electric Pressure Cooker, several factors could be at play. First, ensure a sealing ring is installed. If it is, check for any food residue and clean the ring thoroughly. A worn-out sealing ring will also cause air leakage, so consider replacing it. Finally, make sure the lid is fully rotated and properly locked.
  • K
    Kendra HuffAug 2, 2025
    How to fix a lid that won't lock on my SPT Electric Pressure Cooker?
    • K
      Kevin LeeAug 2, 2025
      If the lid of your SPT Electric Pressure Cooker will not lock, it could be due to a couple of reasons. First, double-check that the sealing ring is correctly installed. If the sealing ring is properly installed, the float may be seized by the push rod. Try pushing the rod with your hands.
  • C
    Cindy NguyenAug 8, 2025
    Why is air escaping from the float valve on my SPT EPC-13C?
    • A
      asnyderAug 8, 2025
      If air is escaping from the float valve of your SPT Electric Pressure Cooker, start by cleaning the sealing ring to remove any stuck food particles. If the issue persists, the sealing ring might be worn out and require replacement. Also, keep in mind that during the preheating cycle, it's normal for some air to escape.
  • V
    Virginia GeorgeAug 13, 2025
    What to do if the float will not rise on my SPT EPC-13C?
    • T
      tsimpsonAug 14, 2025
      If the float on your SPT Electric Pressure Cooker will not rise, ensure that you have enough food and water in the cooker, consulting your recipe for the correct quantities. Also, check that the pressure valve is in the SEAL position and not set to EXHAUST.
  • J
    James TaylorAug 19, 2025
    What to do if I cannot open the lid after air exhaust on my SPT EPC-13C Electric Pressure Cooker?
    • P
      perryjamieAug 19, 2025
      If you cannot open the lid of your SPT Electric Pressure Cooker after air exhaust, it is likely that the float is still up. Press the float down to release any remaining pressure and allow the lid to open.

Summary

Product Features

Important Safeguards

Electric Pressure Cooker Working Principle

Specification

Parts Name

Control Panel

Cooking Preparation

Operating Instructions

Natural Release

Allow pressure to drop naturally; food continues cooking.

Quick Release

Release pressure immediately using the button on the handle.

Time (Manual) Button

Keep Warm Function

Reheat;Brown Function

Delay Timer

Care & Maintenance

Error Codes & Troubleshooting

Suggested Cooking Times and Tips

Your Guarantee

What is NOT COVERED

Details items excluded from the product warranty, such as freight and consequential damages.

SPT EPC-13C Specifications

General IconGeneral
BrandSPT
ModelEPC-13C
Power1000W
MaterialStainless Steel
Control TypeDigital
Voltage120V
FunctionsPressure Cooking, Slow Cooking, Rice Cooking, Steaming
Safety FeaturesOverheat Protection, Pressure Release Valve, Locking Lid

Related product manuals