Why does the fan continue to run after I turn off my SPT Cooktop?
The fan will continue to run until the SPT Cooktop is completely cooled down. This is a safety feature designed to help preserve the life of the cooktop.
What to do if my SPT Cooktop suddenly stops heating during normal operation?
If the SPT Cooktop suddenly stops heating, check the power supply to ensure the unit is receiving adequate power. Also, verify that another appliance isn't drawing power from the same circuit. Check if the fan is still running and that the air vents are not blocked by dust or grease, and ensure enough clearance around the unit. The unit's safety feature automatically shuts it off after 2 hours of idle time in cook mode without any setting changes.
How to fix SPT Mr. Induction SR-964T Cooktop that flashes “E0”, beeps and shuts off?
If your SPT Cooktop displays “E0”, beeps, and shuts off after 10 seconds, ensure proper and compatible cookware is placed on the unit, centered on the ceramic plate. The cookware might be too small or too large for the electromagnetic field; use compatible cookware.
Why does my SPT Mr. Induction SR-964T Cooktop pan cook unevenly or not maintain heat level?
If your SPT Cooktop pan cooks unevenly or does not maintain heat level, make sure you are using cookware with a flat base. Also, be sure that the pan is not smaller than 4.5” or larger than 12”, and that the pan is centered on the cooktop.
What does it mean when my SPT Cooktop displays “E5” without heating?
If your SPT Cooktop displays “E5” without heating, ensure a cooler environment and unblock the air inlet or outlet. If the error remains, further assistance is needed.
What does it mean when my SPT Mr. Induction SR-964T displays “E3” without heating?
If the SPT Cooktop displays “E3” without heating, ensure food is present in the cookware and allow the unit to cool down. If the error remains, further assistance is needed.
Why doesn’t my SPT Cooktop pan get hot enough even on high?
If your SPT Cooktop pan does not get hot enough even though the temperature is set on high, avoid using an extension cord longer than 10 feet, as it can affect the power reaching the cooktop. If the issue persists, further assistance is needed.
What to do if my SPT Mr. Induction SR-964T Cooktop has no power or does not respond?
If your SPT Cooktop is not getting power or does not respond, ensure it is firmly plugged into a correct and dedicated outlet. Also, consider whether there was a power shortage. If the unit has been dropped or handled roughly, further assistance is needed.
What does it mean when my SPT Mr. Induction SR-964T Cooktop displays “E1” without heating?
If your SPT Cooktop displays “E1” without heating, retry after the voltage returns to normal, as the power supply voltage is below 90V+-10V.
What does it mean when my SPT Cooktop displays “E2” without heating?
If your SPT Cooktop displays “E2” without heating, retry after the voltage returns to normal, as the power supply voltage is above 145V+-10V.
General| Type | Induction Cooktop |
|---|---|
| Model | SR-964T |
| Brand | SPT |
| Number of Burners | 1 |
| Power Levels | 8 |
| Total Power | 1800W |
| Control Type | Touch control |
| Voltage | 120V |
| Frequency | 60Hz |
| Power Supply | AC |
| Power Consumption | 1800W |
| Heating Levels | 8 |
| Safety Features | Overheat protection, Auto shut-off |
| Temperature Range | 140°F to 464°F |
Provides constant heat at selected power levels from 100W to 1300W. Features 7 distinct wattage settings for various cooking needs.
Maintains a selected temperature. Offers 13 settings from 100°F (40°C) up to 390°F (200°C) for precise cooking.
Allows setting cooking duration in 1-minute or 10-minute increments, with a maximum of 8 hours.
To Next Page