What to do if my SPT SP-3203 will not dispense smoothly?
If your SPT Dispenser isn't dispensing smoothly, there might be a few reasons. First, ensure the unit is properly plugged in. If it is, try opening the lid to release steam, and also clean the interior of the dispenser.
Why does my SPT Dispenser hot water have an unpleasant odor?
The resin used during manufacturing might be the cause of the mild odor in your SPT Dispenser. This smell should disappear as you continue to use the appliance. Also, try reboiling the water, as the chlorine in the water can cause unpleasant odor or taste.
What to do if SPT Dispenser water does not boil when plugged in?
If the SPT Dispenser doesn't boil water even when plugged in with the power LED on, clean the inner pot or ensure the water level is sufficient. Also, check if the added water is already hot and make sure the water level is above the refill line.
What to do if my SPT Dispenser unit will not switch to Boil?
If your SPT Dispenser won't switch to the boil setting, first ensure that the water level is adequate. Also, try cleaning the inner pot.
Why is the boiling sound excessively loud in my SPT SP-3203?
If the boiling sound from your SPT Dispenser is excessively loud, try cleaning the interior of the unit.
What to do if water is flowing out from my SPT SP-3203 Dispenser?
If water is flowing out of your SPT Dispenser, make sure that the water is filled below the FULL line.
Why is there a white substance floating in the water of my SPT Dispenser?
To address the white substance floating in the water of your SPT Dispenser, clean the unit according to the instructions under Maintenance.
Important warnings and instructions to follow before operating the appliance.
Steps for safely opening and securely closing the appliance lid.
Procedure for detaching and reattaching the top lid of the dispenser.
Instructions on how to fill the dispenser with water to the correct level.
Guidance on initiating the water boiling process and related precautions.
Steps to unlock and dispense hot water from the unit.
Instructions for using the re-boil function to reach boiling point again.
Explanation of the automatic shut-off safety features and conditions.
Method for cleaning the exterior lid and body of the dispenser.
Guide for cleaning the interior parts, including descaling recommendations.
Exclusions from the product warranty coverage.
To Next Page
General