SPT SU-1053 - Part Identification; Component Views; Included Accessories

4.Before using the humidifier, check the power cord for any signs of damage. If the cord is damaged,
DO NOT USE and return the humidifier to the manufacturer under the warranty agreement for repair.
5. Aloose fit between the AC outlet (receptacle) and plug may cause overheating and a distortion of the plug.
Contact a qualified electrician to replace loose or worn outlet.
6.The humidifier should always be unplugged and emptied when not in operation, while being serviced or cleaned.
7.Never tilt or attempt to move the humidifier while it is operating or filled with water. Turn unit OFF and UNPLUG
the humidifier before moving.
8.This humidifier requires regular cleaning.
9.Turn the humidifier OFF if the relative humidity exceeds 60%, or if you notice moisture on the inside of your
windows. For proper humidity reading use a hygrometer, which is available in many hardware and
department stores.
10.DO NOT block the mist nozzle. This will damage the humidifier.
PART IDENTIFICATION
SIDE VIEW TOP VIEW
MIST OUTLET
PET BOTTLE SET
F WATER-LEVEL
I SENSOR OUTLET
| TRANSDUCER
Top Cover
LED LIGHT
ADD WATER LIGHT
VENTILATION
CONTROL PANEL ACCESSORIES
Humidity knob
BOTTLE
ADAPTOR CAP
Adaptor input
(2)