SPT SU-1053 - Setup

*Select a firm, level, and flat location - at least six inches (15 cm) from
any wall or furniture for proper airflow.
Place the humidifier on a water-resistant surface, as water can damage
furniture and some flooring.
OPERATION
CAUTION: DO NOT PLUG THE HUMIDIFIER WITH WET HANDS AS AN ELECTRICAL
SHOCK COULD OCCUR.
* Position the nozzle on the top cover.
+ Fill an empty water bottle (300ml ~ 500ml) with clean or distilled water.
* Do not use Hot Water, doing so may damage the humidifier.
NOTE: TO PROLONG THE LIFE OF THIS HUMIDIFIER,
WE RECOMMEND USING DISTILLED WATER. NEVER ADD
FRAGRANCES OR OIL IN THE WATER, AS IT WILL CAUSE
THE MACHINE TO MALFUNCTION AND VOID YOUR WARRANTY.
* Fit the appropriate Adaptor Cap to the plastic bottle.
* Screw the Adaptor Cap to the bottle by turning clockwise.
Please make sure the Adaptor Cap is securely tightened,
but not over-torque.
(3)