What to do if my SPT WA-1061H doesn't run?
If your SPT Air Conditioner doesn't run, first check if it is properly plugged in. Also, verify if there is a power failure in your location. Another possible reason might be a flashing 'Water Full' indicator, or the room temperature being below the set temperature.
Why does my SPT WA-1061H Air Conditioner seem to do little?
Your SPT Air Conditioner might seem to do little if there is direct sunshine entering the room; in this case, close the curtains. Other factors could be too many windows or doors open, too many people in the room, or something in the room producing a lot of heat.
What to do if my SPT WA-1061H Air Conditioner seems to do nothing?
If your SPT Air Conditioner seems to do nothing, check if the filter is dusty or contaminated. Also, inspect the air intake and output to ensure they are not blocked. The room temperature might be below the set temperature.
What to do if my SPT WA-1061H is too noisy?
If your SPT Air Conditioner is too noisy, check if the unit is positioned unevenly, which could create vibration. Also, verify if the floor underneath the machine is uneven.
General| Type | portable |
|---|---|
| Color | white |
| Operating Area Size | 300 square feet |
| Cooling Settings | 2 |
| Seasonally Adjusted Cooling Capacity | 6500 british thermal units |
| Heater | yes |
| Heating Capacity | 9500 british thermal units |
| Fan Airflow Rate | 292.5 cubic feet per minute |
| Filter | washable |
| Hose | single |
| Remote Control | yes |
| Timer | yes |
| Sleeping Mode | no |
| Current | 8.3 amperes |
| Height | 29.63 inches |
| Width | 12 inches |
| Net Weight | 55.1 pounds |
Safety precautions for using the air conditioner.
Electrical safety guidelines for the unit.
Tips to maximize the unit's operational efficiency.
Step-by-step guide for installing the window slider kit.
Instructions for properly mounting the exhaust pipe.
Overview and functions of the unit's control panel.
How to turn the air conditioner on and off.
How to select operating modes like AUTO, COOL, FAN, or HEAT.
Adjusting the desired temperature for cooling or heating.
Adjusting the fan speed to high or low.
Setting the operating hours for automatic on/off functions.
Using the sleep mode for gradual temperature adjustment.
Information and usage of the heating function.
How to use the remote control for all functions.
Manual adjustment of air direction louvers.
Setting up continuous drainage to avoid manual emptying.
Instructions for cleaning the exterior of the unit.
How to clean the air filters for optimal performance.
Steps for storing the unit at the end of the season.
Details of what the product guarantee does not cover.
To Next Page
