Need help?Do you have a question about the SPX Cooling Technologies Recold JW Series and is the answer not in the manual?
General| Brand | SPX Cooling Technologies |
|---|---|
| Model | Recold JW Series |
| Category | Freezer |
| Language | English |
Open drip-proof motors for outdoor service with 1.15 service factor, mounted on adjustable base.
OSHA approved galvanized steel screens protecting moving parts, easily removed for access.
Forward curved, balanced centrifugal fan with galvanized steel housing and pillow block bearings.
Close coupled, bronze-fitted centrifugal pump with mechanical seal, factory mounted.
Removable PVC assemblies with three-break design for efficient air flow and corrosion resistance.
Copper tubing with stainless steel sheets and copper headers for non-corrosive service.
Large rectangular doors providing air and water-tight seal without gaskets for access.
Solid brass float valve with arm and float ball in an external float box for easy observation and maintenance.
Table detailing unit dimensions (A-L) and access door configurations for various models.
Table detailing model specifications, GPM ranges, and unit load factors for selection.
Table providing pressure drop values for various GPM and model configurations.
Methods to prevent freezing of recirculating water during low load or shutdown periods.
Strategies for protecting the heat exchange coil, including ethylene glycol solutions.
Step-by-step guide for selecting a unit using water as the cooling fluid.
Guide for selecting a unit using ethylene glycol solution as the cooling fluid.
Options for controlling unit capacity, including dual fan motors and variable speed drives.
Options for manual or automatic change-over for spray pump failure backup.
Electric immersion heaters for pan water freeze protection during shutdown.
Finned coil for applications with high entering fluid temperatures or low entering air temps.
Spring type isolator rails for field installation to manage vibration.
Option for 300 stainless steel construction for sump pan and upper casing panels.
To Next Page