Need help?Do you have a question about the SPX Waukesha Cherry-Burrell W-Series and is the answer not in the manual?
General| Brand | SPX |
|---|---|
| Model | Waukesha Cherry-Burrell W-Series |
| Category | Control Unit |
| Language | English |
Details procedures for reporting transit damage or loss of equipment.
Outlines the process and requirements for submitting a warranty claim.
Emphasizes the importance of thoroughly reading the manual before use.
Lists recommended safety standards for equipment operation and maintenance.
Covers procedures for de-energizing equipment and electrical safety.
Guidelines for checking and maintaining safety interlock mechanisms.
Recommends a schedule for regular inspection of industrial equipment.
Specifies using only manufacturer-recommended parts for repairs.
Explains the meaning of DANGER, WARNING, and CAUTION labels.
Discusses factors affecting stainless steel corrosion and prevention methods.
Advises on inspecting and replacing elastomer seals after passivation.
Provides essential overview of the manual's content and scope.
Details the types and technical specifications of the control modules.
Lists the materials used in the construction of the control module components.
Specifies operational conditions and material compatibility for control modules.
Introduces solenoid types and configurations for control modules.
Explains how solenoids control valve actuation using air pressure.
Illustrates air line connections for W60/W80/W90 series valve control tops.
Illustrates air line connections for W70 Mixproof valve control tops.
Describes the setup and configurations for Clippard solenoids.
Provides essential guidance on wiring electrical switches and solenoids.
Shows the electrical connections for AC micro-switches with Parker solenoids.
Shows the electrical connections for DC micro-switches with Parker solenoids.
Details wiring for 2-wire AC proximity switches used with Parker solenoids.
Details wiring for 2-wire DC proximity switches used with Parker solenoids.
Illustrates wiring for 3-wire DC proximity switches with Parker solenoids.
Shows wiring for single Clippard solenoid with DC micro-switches.
Shows wiring for dual Clippard solenoids with DC micro-switches.
Illustrates wiring for two Clippard solenoids and DC micro-switches.
Illustrates wiring for three Clippard solenoids and DC micro-switches.
Shows wiring for dual Clippard solenoids and 2-wire DC proximity switches.
Shows wiring for triple Clippard solenoids and 2-wire DC proximity switches.
Illustrates wiring for dual Clippard solenoids and 3-wire DC proximity switches.
Illustrates wiring for dual Clippard solenoids and 3-wire DC proximity switches.
Shows wiring for single Clippard solenoid and 3-wire DC proximity switches.
Shows wiring for dual Clippard solenoids and 3-wire DC proximity switches.
Details wiring for PMO triple Clippard solenoid setup.
Provides guidance on connecting components using various pin connector types.
Shows 5-pin Brad Harrison AC/DC wiring for switches, no solenoid.
Illustrates Sentinel IV 5-pin Brad Harrison AC/DC wiring for switches.
Details 6-pin Brad Harrison AC/DC wiring with Parker solenoid.
Illustrates 7-pin Brad Harrison AC/DC wiring with Parker solenoid.
Shows 4-pin Turck AC/DC wiring for switches, no solenoid.
Illustrates 5-pin Turck AC/DC wiring for switches, no solenoid.
Details 6-pin Turck DC wiring with Parker solenoid.
Shows 6-pin Turck DC wiring with 3-wire proximity switches.
Details W75 PMO 6-pin Turck DC wiring with 2-wire switches.
Illustrates 6-pin Turck DC wiring with 1 Clippard solenoid.
Shows 8-pin Turck DC wiring with 2 Clippard solenoids.
Illustrates 8-pin Turck DC wiring with 3 Clippard solenoids.
Details 8-pin Turck DC wiring with 2 Clippard solenoids.
Guidance on wiring AS-i and DeviceNet communication modules.
Shows AS-i module wiring with Parker solenoid.
Shows AS-i module wiring with Clippard solenoid.
Details Westlock DeviceNet wiring with Parker solenoid.
Details Westlock DeviceNet wiring with Clippard solenoid.
Illustrates Interlink DeviceNet wiring with Clippard solenoid.
Illustrates Interlink DeviceNet wiring with Clippard solenoid.
Highlights critical safety precautions for maintenance and operation.
Discusses factors influencing the timing of maintenance procedures.
Covers the steps for taking apart the control module components.
Explains how to safely disconnect air and fluid lines.
Notes that control modules require visual checks between maintenance periods.
Provides instructions for reassembling the control module components.
Describes the function and types of switches used in control modules.
Details the mechanical micro switch and its operation.
Describes the electronic proximity switch and its detection method.
Guides on adjusting switch positions for proper valve stem sensing.
Lists parts for AC/DC and long stroke AC/DC Parker solenoids.
Lists parts for DC/L-Stroke solenoids with specific network cards.
Lists parts for AC Mixproof Non Seat Lift Parker solenoids.
Lists parts for Clippard solenoids with various network cards.
Lists parts for valves without solenoids.
Lists parts for proximity switches mounted externally.
Lists parts for proximity switches mounted directly on the valve.
Addresses air leaks between actuator/module or within the base.
Troubleshoots valve operation issues due to low air pressure or control failure.
Diagnoses problems with switch position signaling.
Identifies causes for the absence of an "open" signal.
Addresses issues causing incorrect switch alarm behavior.
Discusses causes and solutions for moisture ingress into the control module.
To Next Page
