To Next PageTo Next Page
Need help?Do you have a question about the SPXFLOW Johnson Pump AquaT Comfort and is the answer not in the manual?
Requirements for seacocks for flushing water inlet and waste outlet.
Choosing the correct pipework method for inlet and outlet based on installation type.
Guidelines for using flexible hose, securing runs, avoiding bends, and keeping lengths short.
Important warnings about flame, sealing compounds, and discharge elbow rotation.
Details on installing the inlet pipework based on toilet position relative to waterline.
Installation for toilet below waterline discharging waste overboard.
Installation for toilet above waterline discharging waste overboard.
Waste discharge to holding tank with elbow below tank top.
Waste discharge to holding tank with elbow always above tank top.
Instructions to ensure safe operation and prevent flooding.
Importance of fullbore seacocks and accessible positioning for safety.
Use of vented loops to prevent siphoning and flooding.
Guidance on installing the toilet considering potential flooding risks.
Importance of fastening all pipework with stainless steel hose clamps.
Mandatory use of vented loops when bowl rim is below waterline to prevent flooding.
Instructions for reassembling the pump for left-hand operation.
Guidelines for selecting a flat, rigid, and strong mounting surface for the toilet.
Ensuring adequate clearance for seat and lid to open without strain.
List of necessary stainless steel screws, nuts, washers, drill bit, and sealant.
Importance of correct operation for safety and comfort, and shutting seacocks.
Steps for initial use, including lubrication and priming.
Steps for normal operation, flushing, and waste discharge.
Steps to take after use, including flushing and closing seacocks.
Guidelines for cleaning the bowl and other parts with appropriate cleaners.
Warnings against using abrasive pads, cream cleaners, or thick liquid cleansers.
Advice on flushing, regular use, and lubrication for toilet longevity.
Warning about minor leaks potentially becoming major, causing sinking.
Step-by-step guide to replacing worn seals on the piston rod.
Draining the system to prevent frost damage and bacterial growth.
Warning about sinking risk if seacocks are left open when disassembled.
Caution against using anti-freeze, recommending glycol-based if used.
Steps for draining the toilet system and disconnecting hoses.
Procedure for winterizing without disassembling the toilet.
Requirement for a service kit containing all wearing parts for overhaul.
Steps to remove the pump assembly from the toilet.
Instructions for dismantling the pump assembly for servicing.
Steps for reassembling the pump assembly with new parts.
Instructions for refitting the serviced pump assembly onto the toilet.
General