EasyManua.ls Logo

Spyder CLIMB RIGHT - Climber Sizing and Assembly; Climber Sizing Procedure

Default Icon
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 4
Size
To size your climbers, just follow these few easy steps:
• Put the aluminum J Hook on the ground and put your
foot in the J hook.
• Place the slide loosely on the aluminum J hook
• Roughly hold the slide approximately 1/2” below your
thigh. (This measurement is just a suggestion. Every
individualisdifferent.Ifyoundittobemorecom-
fortable slightly higher or lower, do what feels best.)
• Onceyoundthebestposition,looselyinstallthetwo
slide bolts into place.
• Now that you know your measurement, install the
sleeve onto the second climber at the same exact
height.
• Lastly, tighten all four sleeve bolts to secure the
sleeves to the climbers.
™
Sizing your Climb Right Climber is one of the
most important things to do correctly. If not
done properly, this could cause extra pressure to
your body which could result in serious pain.
Right Foot Pictured