Spypoint BF-10HD - Video and Quality Configuration; System and Power Options

11
Settings
Video length:
(10s/30s/60s/90s)
Allows the user to select the duration of the recording when the camera
is set in VIDEO mode.
Language:
(English/Français/Deutsch/Italiano/Español)
Allows the user to select a language for the camera menus.
Date:
Allows the user to set the date as Month/Day/Year.
Time:
Allows the user to set the time as Hour/Minute.
Stamp:
(Yes/No)
Allows the user to have date, time, temperature and moon phases printed
on the photos.
New moon:
Waxing Crescent:
First Quarter:
Waxing Gibbous:
Full moon:
Waning Gibbous:
Last Quarter:
Waning crescent:
Quality:
(Low/Medium/High)
Allows the user to set the photo and video resolution. The low resolution
allows the user to save space on the card and the high resolution allows
the user to get a better photo quality.
When the quality is set to" High", the video resolution is automatically set
to 1280 x 720 and when is set to "Medium" or "Low", the video resolution
is automatically set to 640 x 480.
Temperature:
(°C/°F)
Allows the user to select the temperature display.
Continuous:
(Yes/No)
Allows the user to take photos or videos even if the memory card is full.
The camera will continue to record photos or videos by deleting the rst
recorded les.
Power:
(Batteries/Electricity)
Allows the user to select the type of power supply.
Choose "Electricity" if the camera is powered by a main electric power-
supply (using a 12-volt DC adapter, #AD-12V, sold separately (p.19).
A main electric power supply is recommended when camera is used for
security purposes. It provides an instant trigger time when a movement
is detected. The lithium battery pack and the AA batteries can remain
safely inside the camera and it is ideal for blackouts. A 12-volt DC adapter
that can provide a minimum of 800 mA is required (p.19).
Note: When using a main electric power supply, the MULTI-SHOT mode
and the DELAY option are disabled as the camera triggers instantly every
time it detects motion. Also, the printing of the temperature on each
photo is disabled.