Why does the screen of my Spypoint TINY-WBF Security Camera turns off?
If the screen of your Spypoint Security Camera turns off, it could be due to the following reasons: * The camera may be set to PHOTO or VIDEO mode, and the screen turns off after 60 seconds to save battery. * The camera resets to PHOTO or VIDEO mode after 2 minutes of inactivity on the main menu. To restore the screen, turn the camera off and on again.
Why is my Spypoint TINY-WBF impossible to turn on?
If your Spypoint Security Camera won't turn on, start by checking if batteries are inside. Ensure they are correctly installed according to the instructions. Also, verify the battery switch position matches your power source. Consider installing the latest update from the Spypoint website's support section. If all else fails, try replacing the alkaline batteries or recharging the lithium battery pack.
Why does the screen of my Spypoint TINY-WBF Security Camera turn off?
If the screen of your Spypoint Security Camera turns off, it might be set to PHOTO or VIDEO mode. In these modes, the screen turns off after 60 seconds to save battery. Also, the camera automatically resets to PHOTO or VIDEO mode after 2 minutes of inactivity on the main menu. To restore the screen, turn the camera off and then back on.
What to do if my Spypoint TINY-WBF does not respond?
If your Spypoint Security Camera does not respond, try removing the batteries and then reinstalling them. If that doesn't work, replace the alkaline batteries or recharge the lithium battery pack.
Why is my Spypoint TINY-WBF losing its time and date settings?
If your Spypoint Security Camera is losing its time and date settings, the time battery needs to be replaced.
How to fix no person/animal on Spypoint TINY-WBF photos?
If you're not seeing people or animals in your Spypoint Security Camera photos, try re-orienting the camera. You may also need to reduce the sensitivity setting. Another option is to raise the height of the camera. You might also need to move the camera further back or redirect it. Finally, ensure the mounting post or tree is stable.
Why the photos/ videos do not appear on the television from Spypoint TINY-WBF Security Camera?
If the photos or videos from your Spypoint Security Camera do not appear on the television, please check the following: * Verify the camera is correctly connected to the television using the RCA cable. * Ensure the memory card contains photos or videos.
Why Spypoint Security Camera works, but is losing its time and date settings?
If your Spypoint Security Camera is losing its time and date settings, the time battery must be replaced.
What to do if there is no person/animal on Spypoint TINY-WBF photos?
If you are not seeing any person or animal on the photos taken by your Spypoint Security Camera, consider these solutions: * Re-orientate the camera. * Reduce the sensibility setting. * Move the camera further back or redirect it. * Ensure the mounting post or tree is stable.
How to fix Spypoint Security Camera if it's impossible to turn on?
If your Spypoint Security Camera isn't turning on, check the following: * Ensure batteries are installed. * Verify the batteries are correctly installed. * Confirm the battery switch position matches the power source. * Try installing the latest update from the Spypoint website. * Replace alkaline batteries or recharge the lithium battery pack.
General| Camera Type | Trail Camera |
|---|---|
| Resolution | 10MP |
| Video Resolution | 640 x 480 |
| Image Resolution | 10MP |
| Battery Life | Up to 6 months |
| Detection Range | 80 feet |
| Battery Type | 6 x AA |
| Connectivity | Wireless |
| Storage | SD card (up to 32GB) |
| Flash Type | LED |
To Next Page
