What to do if my Spypoint TINY-WBF can't take photos/videos?
If your Spypoint Security Camera isn't taking photos or videos, first, check if there are batteries inside. If so, try replacing the alkaline batteries or recharging the lithium battery pack. Also, the memory card might be full, or the camera might be turned off. Please verify these.
Why does my Spypoint TINY-WBF beep?
If your Spypoint Security Camera beeps, you need to insert a memory card.
Why is the red light in front of my Spypoint TINY-WBF blinking?
If the red light in front of your Spypoint Security Camera is blinking, the camera might be in TEST mode. Alternatively, if the camera is in PHOTO or VIDEO mode, the red light flashes for 60 seconds to allow you to leave the area before a photo or video is taken.
Why the computer can’t play videos from Spypoint TINY-WBF Security Camera?
If the computer can't play videos from your Spypoint Security Camera, it's likely due to the .MP4 video format. You'll need a compatible video player software like VLC, Windows Media Player, or QuickTime.
How to fix no person/animal on Spypoint TINY-WBF photos?
If you're not seeing people or animals in your Spypoint Security Camera photos, try re-orienting the camera. You may also need to reduce the sensitivity setting. Another option is to raise the height of the camera. You might also need to move the camera further back or redirect it. Finally, ensure the mounting post or tree is stable.
Why is my Spypoint TINY-WBF losing its time and date settings?
If your Spypoint Security Camera is losing its time and date settings, the time battery needs to be replaced.
What to do if my Spypoint TINY-WBF does not respond?
If your Spypoint Security Camera does not respond, try removing the batteries and then reinstalling them. If that doesn't work, replace the alkaline batteries or recharge the lithium battery pack.
Why does the screen of my Spypoint TINY-WBF Security Camera turn off?
If the screen of your Spypoint Security Camera turns off, it might be set to PHOTO or VIDEO mode. In these modes, the screen turns off after 60 seconds to save battery. Also, the camera automatically resets to PHOTO or VIDEO mode after 2 minutes of inactivity on the main menu. To restore the screen, turn the camera off and then back on.
Why is my Spypoint TINY-WBF impossible to turn on?
If your Spypoint Security Camera won't turn on, start by checking if batteries are inside. Ensure they are correctly installed according to the instructions. Also, verify the battery switch position matches your power source. Consider installing the latest update from the Spypoint website's support section. If all else fails, try replacing the alkaline batteries or recharging the lithium battery pack.
General| Camera Type | Trail Camera |
|---|---|
| Resolution | 10MP |
| Video Resolution | 640 x 480 |
| Image Resolution | 10MP |
| Battery Life | Up to 6 months |
| Detection Range | 80 feet |
| Battery Type | 6 x AA |
| Connectivity | Wireless |
| Storage | SD card (up to 32GB) |
| Flash Type | LED |
To Next Page
