SQlab M-D Series - English

SQlab | SPORTS ERGONOMICS | M-D LINE SADDLES | EDITION EN 2022-11 | PAGE 3
Table of Content
Product Designation ........................................................................................................... 4
Foreword ............................................................................................................................ 4
Illustration ......................................................................................................................... 5
Intended Use ...................................................................................................................... 5
Mounting Compatibility and Operating Safety ...................................................................... 7
Assembly ........................................................................................................................... 9
Saddle Height..................................................................................................................... 9
Saddle Angle .................................................................................................................... 10
Post-seat/Horizontal Positioning of the Saddle ................................................................... 11
Tightening Torques ............................................................................................................ 11
eBike Ready ..................................................................................................................... 12
The SQlab Active Saddle Technology (model-dependent) ................................................... 13
Active Movement Setting .................................................................................................. 13
Technical Data .................................................................................................................. 17
Inspection ........................................................................................................................ 18
Maintenance .................................................................................................................... 18
Liability for material defects and warranty ......................................................................... 18
Wear and Storage ............................................................................................................. 19
Manufacturer and Distribution .......................................................................................... 19
Foreign Distributors, Dealers and Addresses ...................................................................... 20