Document No. 500 045-001
December, 1992 Installing PCWS Software
________________________________
© 1991 Square D All Rights Reserved
_________________________
Page 11
NOTE
(1) The NODE to which the print device is attached must
be defined using NCP.
(2) PROTECTION for the print device must be set for
WORLD:RW (SET PROTECTION=W:RW/DEVICE TXAn:).
The following is an example of LNKRPT showing the parameter to modify.
:LNKRPT
Printer
Port
➴
copy %2 lpt1: >NUL:
Del %2 >NUL:
Step 4. Set and Read Display Modification
The HOST SETDSP and READDSP of Display 21 must be modified for each
PC Workstation (other than the first workstation, #1) if these calls are being
used in the Host logic.
Step 5. Set Environment
The following parameters may be changed, either by specifying a new value
with an environment setting or by using a command line switch. Note, if there
is more than one PC Workstation or CWS, verify that the CRTNUMs are
different.
• CRT number
• Local CRT file name
• Local default login account
• Local system display
• Printer type
• Destination SAP for Database Access server
• Destination SAP for CRISP Access server
• Auto-link report file name.
NOTE
The Environment settings are temporary and will be lost on
reboot. This could affect SETDSP and READDSP of other
PC Workstations if identical CRT numbers are located.
To Next Page
Loading...