Square D CRISP - Page 17

Installing PCWS Software
Document No. 500 045-001
December, 1992
Page 12
________________________
© 1991 Square D All Rights Reserved
________________________________________
Step 5. Set Environment (cont)
Valid Selections
The following defines the valid selections.
• CRT number
- range = 1-50
- default = 1
- environment string = CRTNUM=1
- command line switch = /c 1
• Local CRT file name
- range = any valid filespec
- default = USER.CWS
- environment string = CRTFILE=USER.CWS
- command line switch = /f USER.CWS
• Local default login account
- range = 0-63
- default = 0
- environment string = LOGACNT=0
- command line switch = /a 0
• Local system display
- range = 1-max display in local file
- default = 21
- environment string = SYSDSP=21
- command line switch = /d 21
• Printer type
- range = IBM, EPSON, LQ1500,
SIXEL1 (B/W), SIXEL2 (color),
LJ250
- default = IBM
- environment string = PRTYPE=IBM
- command line switch = /p IBM
• Destination SAP for Database Access server (must be the same as the value
on the host VAX
- range = 4-252 (multiple of 4)
- default = 12
- environment string = DBSAP=12
- command line switch = /s 12
• Destination SAP for CRISP Access server (must be the same as the
value on the host VAX
- range = 4-252 (multiple of 4)
- default = 4
- environment string = HSSAP=4
- command line switch = /h 4