Square D CRISP - Page 18

Document No. 500 045-001
December, 1992 Installing PCWS Software
________________________________
© 1991 Square D All Rights Reserved
_________________________
Page 13
Step 5. Set Environment
Valid Selections (cont)
• Auto-link report file name.
- range = any valid filespec
- default = LINKRPT.TXT
- environment string = RPTFILE=LINKRPT.TXT
- command line switch = /r LINKRPT.TXT
Changing Environment Strings
The following is an example of how to change the CRT number using the
environment string.
• C:\CRISP> SET CRTNUM=22
The following is an example of how to change the CRT number using a
command line switch.
• C:\CRISP> PCWS /C 22
The following is an example of how to check the environment settings.
• C:\CRISP> SET