EasyManua.ls Logo

Square Scrub Doodle Scrub EBG-9 - About Your Doodle Scrub; Introduction to EBG-Series; General Safety; Grounding and Electrical Safety

Square Scrub Doodle Scrub EBG-9
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Doodle Scrub by Square Scrub
Owner’s Manual
About your Doodle Scrub
Floor Surface Preparation Machine
The Doodle Scrub offers a 1/4 hp, 4100 rpm motor, a heavy duty powder coated
10 gauge steel frame, and a two-position handle. The option to connect the
handle on either the side of the machine or at the back offers the exibility to
adjust the machine to suit your needs. At 22 lbs, the Doodle Scrub offers nearly
the same pounds per square inch as its parent machine, the EBG-20/C.
The Doodle Scrub is designed to go where larger machines can’t. Cleaning stairs,
around the toilet, under bathroom sinks is easy with the Doodle Scrub. This
makes it the perfect companion to other EBG Series Floor Preparation Machines.
Please visit our website at www.squarescrub.com for informative videos and
literature.
Contents
• Introduction
• Manual Conventions
• Safety / Important
• Machine Transport
• Operating Instructions
• Troubleshooting Guide
• Parts Breakdown
• Warranty Information
• Pad Information
page 1
WARNING OF POTENTIAL INJURY! MOVING PARTS! UNPLUG BEFORE SERVICING!
This product contains moving parts. To reduce the risk of injury, unplug before servicing.
General Safety
- This oor-nishing machine shall be grounded while in use to protect the operator from
electric shock. The machine is provided with a three-conductor cord and a three-contact
grounding type attachment plug to t the proper grounding type receptacle. The green (or
green and yellow) conductor in the cord is the grounding wire. Never connect this wire to
anything other than the grounding pin of the attachment plug.
- This machine is for use on a nominal 120-volt circuit and has a grounding plug that
resembles the plug in gure 1. Make sure that the machine is connected to an outlet
having the same conguration as the plug. See gure 1 on page 2.
No adapter should be used with this machine.
Introduction
You are now the proud owner of an EBG-Series machine.
This machine is a product of Square Scrub. It is made of
ne materials and will give you many years of satisfactory
service if maintained and used according to the guidelines in
this owner’s manual.
Please read all Installation, Operation, and Safety
Instructions before using this machine.
***This product is for Industrial/Institutional/Commercial Use Only***