GROUNDING PIN
BRANCHE DE MISE À LA TERRE
GROUNDED OUTLET
PRISE DE COURANT
GROUNDING INSTRUCTIONS
DIRECTIVES DE MISE À LA TERRE
4 Parts & Operations Manual Doodle Scrub / Doodle Mop
Maintenance Schedule
Prior to using (daily)
• Check AC power cord. Do NOT operate equipment if AC power
cord is cut, frayed, or if ground is missing.
• Check grip face and driver pad. Inspect for wear/debris.
After use (daily)
• Clean pad and base plate assembly. Remove or replace pad as needed.
• Inspect grip face for wear. Remove debris between grip face and base plate.
• Wipe entire unit with a damp microber cloth.
• Make certain a pad is placed on the grip face.
Weekly Preventative Maintenance
• Check grip face for wear.
• Use a vacuum to clean away debris build-up around base plate.
Annually
• Replace ALL isolators.
• Bearing assembly should be replaced as needed. *
*The bearing assembly is considered to be a wear item. We recommend that the bearing assembly be replaced as needed.
Unit will become noisy when bearing needs to be replaced.
**NOTE: Be sure to replace isolators when you replace the bearing.
Manual Conventions
Danger: Indicates an imminently hazardous situation which, if not avoided, may result in death or serious injury.
Caution: Indicates that the machine or property damage could result if instructions are instructions are not followed.
Note: Provides helpful information.
Severe bodily injury or death can occur to you or other personnel if warnings found on this machine or in this owner’s manual are
ignored. Read and observe all statements and instructions found on this machine and in the owner’s manual.
To Next Page
Loading...
