Square Scrub EBG-9 - Page 6

6 Parts & Operations Manual Doodle Scrub / Doodle Mop
Warning: This appliance is not suitable for picking up hazardous dust.
Transport
To transport this machine, the following procedure is advised:
• Unplug machine from power source.
• Always leave a pad on the machine to protect the grip face from damage in transport and storage.
• Secure machine when transporting in a vehicle to prevent movement.
• NEVER PICK THE DOODLE SCRUB OR DOODLE MOP UP BY THE HANDLE ALONE!
• Always pick the Doodle Scrub or Doodle Mop up with one hand on the handle and the other hand picking up the base.
Failure to do so could result in damage to the machine.
Operating Instructions
• Move machine to work location. Never operate, transport, or store the machine without a pad to protect the grip face.
• Ax the handle clip onto either of the base clips.
• Ensure that the motor plug and handle plug are fully seated before operating.
• Connect the battery for battery powered models, or plug machine into grounded power outlet.
• Hold the machine handle with one hand while gently pressing the switch on the top of the handle with the other hand.
• Begin moving the machine over the oor in either a mop-like motion or along edges.
• Continue moving the machine over the selected surface, checking your pad every 15 to 30 minutes (depending on pad
in use) to maintain optimum performance.
Airborne Noise and Vibration Emissions
Sound Power Level Vibration Total at Base
120 V:
Under 57dBA
120 V:
Avg. 6.5 mm /s2, max at 6.9 mm /s²
240 V:
Under 57dBA
240 V:
Avg. 5.8 mm /s2, max at 6.0 mm /s²
42Vdc:
Under 57dBA
42Vdc:
Avg. 6.5 mm /s2, max at 6.9 mm /s²