squatty potty Fold-N-Stow User Manual

If your stool was mishandled in shipping, one or both of the side legs
may have become disconnected from the stool.
DO NOT worry. This is simple to fix.
You won’t need any tools. You just need a bit of patience to follow
these easy steps:
Fold-N-Stow Assembly

squatty potty Fold-N-Stow Specifications

General

Product Name	Squatty Potty Fold-N-Stow
Category	Bathroom Aid
Type	Toilet Stool
Material	Plastic
Color	White
Foldable	Yes
Non-Slip Feet	Yes

Summary

Fold-N-Stow Assembly Guide

Initial Stool Setup

Lay the stool on its top and position detached legs for re-assembly.

Separate Leg Components

Pry apart the two pieces of a detached leg at the hinge to separate them.

Attach First Leg Piece to Stool

Slide hinge holes of one leg piece onto the stool's hinge pins.

Attach Second Leg Piece to Stool

Attach the other leg piece onto the remaining hinge pins.

Verify Leg Orientation

Ensure flat surfaces face outward and ribbed sides face inward for correct placement.

Align Hinge Connections

Open the stool and confirm all 6 leg hinge holes align with the 6 hinge pins.

Secure Leg Hinges

Firmly snap the two leg hinge pieces together to lock them.

Finalize Hinge Engagement

Use mallet or foot pressure to ensure hinges fully engage and nest into the slot.