Page | 2
Contents
1. Introduction Page 2
2. Connecting to and setting up the Victron Energy Smart Solar Page 3
Charge controller MPPT 75 / 10
3. Record of changes Page 8
Introduction
The Solar lid and assembly once complete is ready to plug into various assets and also has
the potential to connect to a variety of batteries. The aim of this document is to aid the
successful setup of the solar regulator which is housed within the solar box.
This setting up can be achieved via remotely accessing using a smart device over Bluetooth
connection. The Bluetooth name of the regulator is to match the asset number assigned to
the Solar lid assembly.
To Next Page
Loading...