Need help?Do you have a question about the Srne HF2430U60-100 and is the answer not in the manual?
General| Model | HF2430U60-100 |
|---|---|
| Rated Power | 2400W |
| Output Power | 2400W |
| Frequency Range | 50Hz/60Hz (Auto sensing) |
| Output Voltage Regulation | 230VAC ± 5% |
| Waveform | Pure sine wave |
| Battery Voltage | 24VDC |
| Maximum PV Array Power | 3000W |
| Maximum PV Array Open Circuit Voltage | 145VDC |
| Maximum Charging Current | 60A |
| Maximum Efficiency | 98% |
| Cooling | Fan cooling |
| Selectable Voltage Range | 170-280VAC (For Personal Computers), 90-280VAC (For Home Appliances) |
| Transfer Time | 10ms (For Personal Computers), 20ms (For Home Appliances) |
| Standby Power Consumption | 2W |
| Protection Features | Overload, Short Circuit, Over Temperature |
| Operating Temperature | 0°C ~ 55°C |
Outlines critical safety precautions and procedures before installing the inverter.
Specifies wire diameters, current ratings, and circuit breaker types for safe installation.
Details the steps for physically installing the inverter and connecting wiring.
Describes the different modes for charging the battery using solar and mains power.
Explains the different modes for supplying power to loads from the inverter or mains.
Explains how to configure various settings and parameters via the LCD screen.
To Next Page