Ss Brewtech FTSs2 - Page 14

Page 14
ADVANCED CONTROLLER SETTINGS (CONTINUED)
DELAY PROTECTION SETTING
UPPER AND LOWER LIMIT SETTINGS
Press “Set” key and hold more than 3 seconds to enter the menu display,with “” or “” key adjusted
to the screen, appearing “P7” code, press the “Set” key to display the delay setting value, then press
the “” or “” key to adjust the parameters. Factory Default = “5” min.
Press “Set” key and hold more than 3 seconds to enter the menu display, with “” or “” key adjusted
to the screen, appearing “HS” or “LS” code, press the “Set” key to display the upper or lower limit set
value, Then press “” or “” key to adjust the parameters. HS means upper limit. LS means lower
limit. Factory Default = “-44, +299”.
Set
Rst
SET
Set
Rst
SET
Set
Rst
SET