8790-03
1. COMPONENT SPECIFICATIONS
The parking aid system emits the supersonic wave signals from the sensors on the rear bumper with a
specific interval and detects the reflected signals from obstacles while the gear selector lever is in "R"
position. The alarm interval increases as the obstacle approaches. This supplementary system is to
secure the safety distance for parking.
1) Parking Aid Unit
Detecting type: Super sonic wave
Detecting distance: 25 cm ~ 120 cm (distance
between sensor and obstacle)
2) Parking Aid Sensor
1. Type: Piezo ceramic element
3. Detecting range (13.5 V)
-
-
There is no upper mounting cover and
spring in the PAS sensor installed in this
vehicle.
-
To Next Page
Loading...
Need help?
General
