01-40
undefined
0000-00
ENGINE GENERAL
Inspect the belt system including: the webbing, the buckles, the latch plates, the retractor, the
guide loops and the anchors.
Lap and Shoulder Belts Condition and Operation
▶
7) At Least Annually
On vehicles with movable head restraints, the restraints must stay in the desired position.
Movable Head Restraint Operation
▶
Be alert to rattles in the rear of the vehicle. The spare tire, all the jacking equipment, and the
tools must be securely stowed at all times. Oil the jack ratchet or the screw mechanism afte
each use.
Spare Tire and Jack Storage
▶
Lubricate the key lock cylinder.
Key Lock Service
▶
Lubricate all the body door hinges including the hood, the fuel door, the rear compartment
hinges and the latches, the glove box and the console doors, and any folding seat hardware.
Body Lubrication Service
▶
Underbody Flushing
▶
Flushing the underbody will remove any corrosive materials used for ice and snow removal and
dust control. At least every spring clean the underbody. First, loosen the sediment packed in
closed areas of the vehicle. Then flush the underbody with plain water.
Engine Cooling System
▶
Inspect the coolant and freeze protection fluid. If the fluid is dirty or rusty, drain, flush and refill
the engine cooling system with new coolant. Keep the coolant at the proper mixture in order to
ensure proper freeze protection, corrosion protection and engine operating temperature.
Inspect the hoses. Replace the cracked, swollen, or deteriorated hoses. Tighten the clamps.
Clean the outside of the radiator and the air conditioning condenser. Wash the filler cap and the
neck. Pressure test the cooling system and the cap in order to help ensure proper operation.
To Next Page
Loading...
Need help?
General
