SSCOR DUET 2314 Series

Questions and Answers

S
samuel33Aug 4, 2025
What to do if SSCOR Cleaning Equipment has no suction?
- C
  Cheyenne HamiltonAug 4, 2025
  If your SSCOR Cleaning Equipment shows no suction while the pump is running, there might be several reasons. First, check if the vacuum line is loose and ensure all pneumatic connections are secure. Also, verify that the canister lid is properly secured. If the catheter thumb vent is open, occlude it. If these steps don't resolve the issue, the canister might be defective and require replacement. In some cases, debris collected in the pump or a defective pump or regulator could be the cause, necessitating pump or regulator replacement.
M
Monica YuAug 11, 2025
What to do if SSCOR Cleaning Equipment does not function when turned on?
- J
  Julia AllenAug 11, 2025
  If your SSCOR Cleaning Equipment does not function when the switch is turned on, the battery may be discharged, so reconnect it to a charging source. Alternatively, internal electrical connections might be disconnected; in this case, open the unit and reconnect the electrical connections.
E
Eileen MunozAug 19, 2025
Why is the power source LED not lit on my SSCOR Cleaning Equipment?
- C
  Charles GentryAug 19, 2025
  If the Power Source Connected LED on your SSCOR Cleaning Equipment is not lit, it could be due to a blown fuse. In this case, replace the fuse in the power supply or input receptacle. Another possibility is a disconnected power cord, so ensure the cord is securely reconnected. Additionally, check for disconnected internal electrical connections and reconnect them if necessary.
J
Justin SmithAug 26, 2025
How to fix blinking LED on SSCOR Cleaning Equipment?
- M
  Maria WilliamsAug 26, 2025
  If the LED on your SSCOR Cleaning Equipment is blinking, it indicates low battery capacity. The suggested solution is to replace the battery.