How to eliminate engine noise (alternator whine) in Ssl Evolution EV4.400 Car Amplifier?
To address engine noise (alternator whine) in your Ssl Car Amplifier setup, check that speaker leads and RCA grounds are not shorted to the vehicle chassis. Also, ensure that the head unit is properly grounded.
Introduces the EVOLUTION series of high power car audio amplifiers and their features.
Lists all items that should be included in the amplifier package.
Details the key features and technical specifications of the EVOLUTION amplifier series.
Explains the amplifier's ability to operate at 2 Ohm loads and the implications.
Provides essential safety guidelines and precautions for using the amplifier.
Outlines important safety measures to take during amplifier installation.
Step-by-step instructions for securely mounting the amplifier in a vehicle.
Guide to properly connecting power, ground, remote, input, and speaker wires.
Details the procedure for connecting the amplifier using low-level (RCA) inputs.
Details the procedure for connecting the amplifier using high-level speaker outputs.
Illustrates the correct wiring for power supply and speaker connections.
Provides solutions for common operational problems and symptoms.
Lists the technical specifications for the EV2.200 and EV4.400 models.
Introduces the EVOLUTION series of high power car audio amplifiers and their features.
Lists all items that should be included in the amplifier package.
Details the key features and technical specifications of the EVOLUTION amplifier series.
Explains the amplifier's ability to operate at 2 Ohm loads and the implications.
Provides essential safety guidelines and precautions for using the amplifier.
Outlines important safety measures to take during amplifier installation.
Step-by-step instructions for securely mounting the amplifier in a vehicle.
Guide to properly connecting power, ground, remote, input, and speaker wires.
Details the procedure for connecting the amplifier using low-level (RCA) inputs.
Details the procedure for connecting the amplifier using high-level speaker outputs.
Illustrates the correct wiring for power supply and speaker connections.
Provides solutions for common operational problems and symptoms.
Lists the technical specifications for the EV2.200 and EV4.400 models.
General| Channels | 4 |
|---|---|
| Power Output | 400W |
| THD @ RMS Output | 0.01% |
| Minimum Impedance Unbridged | 2 Ohms |
| Minimum Impedance Bridged | 4 Ohms |
| RCA Inputs | Yes |
| Speaker Level Inputs | Yes |
| RMS Power @ 4 Ohms | 100W x 4 |
| RMS Power @ 2 Ohms | 200W x 4 |
| Bridged RMS Power @ 4 Ohms | 400W x 2 |
| Input Sensitivity | 0.2V - 6V |
| Crossover | Variable |
To Next Page
