SSS Siedle BTSV 850-03 User Manual

Bedienungsanleitung
Bus-Telefon Standard
mit Farbmonitor
BTSV 850-03
für den Endkunden
Operating Instructions
Standard bus telephone
with colour monitor
BTSV 850-03
for end users
Notice d'utilisation
Combiné bus standard
avec moniteur couleur
BTSV 850-03
pour le consommateur
Istruzioni per l’uso
Citofono bus standard
con monitor a colori
BTSV 850-03
per il cliente nale
Gebruikershandleiding
Bus-telefoon standaard
met kleurenmonitor
BTSV 850-03
voor de eindgebruiker
Betjeningsvejledning
Bustelefon-Standard
med farvemonitor
BTSV 850-03
til slutbrugeren
Bruksanvisning
Buss-telefon Standard
med färgmonitor
BTSV 850-03
för slutkunden

SSS Siedle BTSV 850-03 Specifications

General

Brand	SSS Siedle
Model	BTSV 850-03
Category	Telephone
Language	English

Summary

Device Operations

Accepting Door Calls

Accept calls within 45 seconds of the last ring tone. Different tones for front and apartment doors.

Door Release

Press the door release button to open the door from which the last call originated for 3 seconds.

Light Control

Press the light button to switch on lighting, if connected by an installer.

Muting the Bell

Briefly press mute button to toggle ringing off/on. Red light indicates mute is active.

Selecting a Door Station

Lift receiver and press light button twice for speech connection to the last calling door station.

Ring Tone Volume Adjustment

Set ring tone volume to 5 levels by pressing mute button. Volume increases sequentially.

Ring Tone Melody Selection

Choose from 11 melodies. Set melody for the last calling door station. Can be changed via mute button.

Monitor and Control Functions

Monitor Operation

Press monitor button to view camera from last door call if no call is active.

Brightness and Colour Settings

Adjust brightness and colour using two rotary controllers.

Care and Servicing

Phone Care Instructions

Clean with a soft cloth dampened with mild soap solution. Avoid harsh chemicals and abrasives.

Servicing Information

Statutory warranty conditions apply. Device exchange must be performed by an electrical installer.

Key Assignment Customization

Light, monitor-on, and mute buttons can be programmed with different functions by an installer.