012 WWW.STUPIDSIMPLE.TOOLSSST003
Operations & Maintenance
Troubleshooting
SST00304
PROBLEM: DRAINS LEAKING
SOLUTION: Move drain pins to ensure o-rings make a proper seal with
PROBLEM: AIR LEAKING FROM CANISTER TOP THREADS
SOLUTION: Check that O-ring at top of canister is not pinched or damaged
PROBLEM: POOR OUTPUT PERFORMANCE
SOLUTION: Ensure sintered filter isn’t clogged and exhausted
Observe Filter Health Indicator to determine if Coalescing filter
is clogged
Clean the stage 3 stainless filters of any desiccant particles
PROBLEM: DESICCANT LIFE TOO SHORT
SOLUTION: Ensure compressor tank drain is actuating every pump cycle
Ensure MEGAFLOW is not plumbed with air intake at a low
point, allowing condensate to drain into the input
Install refrigerated air dryer before MEGAFLOW
To Next Page
Loading...