SST MEGAFLOW - Air Line Connection and Purging

003
Unpacking and Assembly
Quick Start Guide
Introduction
WWW.STUPIDSIMPLE.TOOLSSST003
4. Plumb Air Lines
a. 3/4” NPT Inlet and outlet
b. Use included 3/4” to 1/2” Adapters
5. Apply air pressure
6. Purge your outlet air for 1 min at 60-100PSI
a. This clears out any desiccant dust from assembly and transport
7. Enjoy!
01
DIRTY AIR FROM
COMPRESSOR / AIR DRYER
CLEAN AIR TO
AIR DISTRIBUTION