SSV Works MRB3 - Tools Needed for Installation; Parts List Images

SSV WORKS , 201 N. Rice Ave Unit A, Oxnard , CA 93030
www . SSVworks . com I Phone : 818 - 991 - 1778 I Fax : 866- 293 - 6751
WARRANTY INFORMATION:
All SSV Works enclosures are covered by a limited lifetime warranty against defects in
material or workmanship . All SSVWorks Electronics are covered by a limited 1 year warranty
against defects in material or workmanship . All Kicker Speakers are covered by a limited 1
year warranty against defects in material or workmanship. All Kicker Amplifiers are covered by
a limited 2 year warranty against defects in material or workmanship . Labor for replacement
of defective components is not covered . Contact SSV Works for further warranty information .
RKR-2K
Can-Am Ryker 2-Speaker Audio Kit
A
Please read and understand these
instructions completely before
installation to avoid possible injury , or
damage to the accessory or vehicle.
- Panel Removal Tool - 10mm wrench - 5mm alien key - T20 , T30 torx - #1 phillips screwdriver - Drill & 1/8 " 5/16" drill bits - Scribe or marker
PARTS LIST IMAGES
1. RKR-2K
5. Grommet
9. #4 Coarse Threaded Screw x2
2. MRB3 Brain and Tray
6. M6x1.0x16mm 5mm Allen
Head Screws x4
10. M3x0.5x8mm Machine
Screwx2
3. Mounting Brackets
7. Push Pinsx4
<
11. ZipTies
4. Center Cover
8. M6x1.0x12mm T30 Torx
Screws & Washers x4
1