32
Turning on a heating zone
Locate the touch controls on the keypad which corresponds to the cooking
zone on which you have placed your pan.
•
Press the touch control.
The power level display shows 0, the hob is switched on.
•
Set the power level required by pressing the
touch control.
Once you have pressed the touch control, if you do not select a power
level, the instruction will be cancelled automatically after 10 seconds.
•
Adjust the power level during cooking
You can adjust the power level from 1 to 9 at any time during cooking using the
or touch controls.
Turning off a heating zone
•
Press the touch control of the zone concerned.
Using 2 cooking zones simultaneously
These two zones have a total of 2800 W of power available, distributed
automatically between the front and rear zones.
This means that when one zone is being used at maximum, the power of the other
is automatically reduced.
The most recent instruction always takes priority.
Use
For the user
Layout
For the user
Display showing (1 to 9) the power level set for each
heating zone.
Symbol indicating the heating zone on the hob
Example shown: front zone
Power level adjustment + or - for each heating zone.
On / off touch control for each heating zone
To Next Page
Loading...