st model acrobat User Manual

Attach aileron pushrods and insert carbon rod through one wing.

Insert carbon rod through the other wing and secure wings to fuselage.

Connect aileron servo wires and mount winglets with tapping screws.

Install the horizontal stabilizer and vertical fin onto the fuselage.

Fix the tail wing with screws and connect pushrods to servo horns.

Insert and secure the landing gear components using lockers and screws.

Install propeller adapter, propeller, and spinner securely onto the motor shaft.

Install battery and verify correct Center of Gravity position for safe flight.

Ensure spacious airfield, check wing/stabilizer security, and install propeller.

Fly in calm conditions, check controls, switch on transmitter, and launch safely.

Always land into the wind, unplug battery, switch off transmitter, and inspect plane.

Keep spectators clear, avoid defective parts, handle batteries safely, and do not modify.