ST7735R
V0.2 107 2009-08-05
10.1.22 RGBSET (2Dh): Color Setting for 4K, 65K and 262K
2DH RGBSET (Color Set for 4K, 65K, 262K and 16.7M)
Inst / Para
D/CX
WRX
RDX
D17-8
D7 D6 D5 D4 D3 D2 D1 D0 HEX
RGBSET
0 ↑ 1 - 0 0 1 0 1 1 0 1 (2Dh)
1st parameter
1 ↑ 1 - - - R005
R004
R003
R002
R001
R000
∣
1 ↑ 1 - - - Rnn5
Rnn4
Rnn3
Rnn2
Rnn1
Rnn0
∣
1 ↑ 1 - - - R315
R314
R313
R312
R311
R310
∣
1 ↑ 1 - - - G005
G004
G003
G002
G001
G000
∣
1 ↑ 1 - - - Gnn5
Gnn4
Gnn3
Gnn2
Gnn1
Gnn0
∣
1 ↑ 1 - - - G635
G634
G633
G632
G631
G630
∣
1 ↑ 1 - - - B005
B004
B003
B002
B001
B000
∣
1 ↑ 1 - - - Bnn5
Bnn4
Bnn3
Bnn2
Bnn1
Bnn0
128th parameter
1 ↑ 1 - - - B315
B314
B313
B312
B311
B310
Description
This command is used to define the LUT for 12bits-to-16bits / 16-bit-to- 18bits color depth conversations.
128-Bytes must be written to the LUT regardless of the color mode. Only the values in Section 9.18 are referred.
In this condition, 4K-color (4-4-4) and 65K-color(5-6-5) data input are transferred 6(R)-6(G)-6(B) through RGB LUT
table.
This command has no effect on other commands/parameters and Contents of frame memory.
Visible change takes effect next time the Frame Memory is written to.
Do not send any command before the last data is sent or LUT is not defined correctly.
Default
Status Default Value
Power On Sequence
Random
S/W Reset
Contents of the look-up table protected
H/W Reset
Random
Flow Chart
To Next Page
Loading...
