ST7735R
V0.2 32 2009-08-05
9.3.2 9.3.2 Read cycle sequence
The read cycle (E low-high-low sequence) means that the host reads information from LCD driver via interface. The driver
sends data (D[17:0]) to the host when there is a rising edge of E and the host reads data when there is a falling edge of E.
Figure 9.3.3 6800-series read protocol
Note: E is an unsynchronized signal (It can be stopped)
Figure 9.3.4 6800-series parallel bus protocol, read data form register or display RAM
To Next Page
Loading...
